High frequency electrosurgical unit that can be used to simultaneously perform monopolar and bipolar surgery.

DOUBLE OPERATIONAL ACTIVITY

• two output channels for monopolar cutting
• two independent calibrations and channels for the most frequent monopolar coagulations

CONTROLLED CUTTING PROCEDURES

• intensified cutting currents for incisions without eschar
•  cutting current with coagulating properties for dissection with controlled bleeding
•  low capacitive coupling in endoscopic procedures using Slow BLEND current

DOUBLE CONTROLLED COAGULATION PROCEDURES

• SPEEDY coagulation and DEEP coagulation available to 2 operators
• SPRAY coagulation obtainable with handpiece or pedal

BROAD BIPOLAR FEATURES

• bipolar cutting with selectable bleeding control
• slow BLEND cutting currents
• automatic start and stop of coagulation that can be activated separately

TOTAL SAFETY FOR PATIENT AND SURGEON

• acceptability of the contact impedance between the patient’s body and the neutral plate continuously verified by the Skin Plate Electronic Control (SPEC)
•  continuous monitoring of radio frequency leakage current
• variations in mains voltage automatically compensated before starting the supply of power and radio frequency

CUSTOMIZED PROCEDURES

• independent choice of coagulation currents and power levels of each of the two operators
• ten personal procedures that can be configured and immediately recalled

CONDUCTION OF EXTENSIONS AND CONNECTION SIGNALS

• outputs for piloted connections of argon plasma units and fume extractors

AUTOMATIC SELF-DIAGNOSIS

• automatic diagnostic check of the complete current functionality of the electronic unit and connected accessories and coded indication of the malfunctions found.
• OUTPATIENT SURGERY
• GENERAL SURGERY
• PEDIATRIC SURGERY
• PLASTIC SURGERY
• THORACIC SURGERY
• VASCULAR SURGERY
• DERMATOLOGY
• ENDOSCOPY
• GASTROENTEROLOGY
•  GYNECOLOGY
• NEUROSURGERY
• ORTHOPEDICS
•  ENT
•  PNEUMOLOGY
•  UROLOGY
•  VETERINARY

Technical features

• Max pure monopolar cutting power CUT: 300 W – 300 Ohm

• Max monopolar cutting-coag power CUT80%: 250 W – 300 Ohm

• Max monopolar cutting-coag power CUT60%: 200 W – 300 Ohm

• Max monopolar cutting-coag power CUT40%: 150 W – 300 Ohm

• Max ENHANCED monopolar cutting power: 200 W – 500 Ohm

• Max monopolar BLEND cutting-coag power: 200 W – 300 Ohm

• SPEEDY monopolar coagulation max power: 100 W – 500 Ohm

• Max DEEP monopolar coagulation power: 100 W – 200 Ohm

• Max SPRAY monopolar coagulation power: 70 W – 2000 Ohm

• Max monopolar coagulation power SPRAY ARGON: 70 W – 2000 Ohm

• Max bipolar CUT cutting power: 95 W – 150 Ohm

• Max bipolar cutting-coag cutting power CUT80%: 95 W – 150 Ohm

• Max bipolar cutting-coag cutting power CUT60%: 95 W – 150 Ohm

• Max bipolar cutting-coag cutting power CUT40%: 60 W – 150 Ohm

• Max bipolar cutting-coag power BLEND: 90 W – 150 Ohm

• COAG bipolar coagulation max power: 70 W – 100 Ohm

• Monopolar/bipolar working frequency: 425 kHz / 525 kHz

• Neutral electrode: F

• Selectable power supply: 115-230 Vac

• Mains frequency: 50-60 Hz

• Maximum absorbed power: 1000 VA

• Dimensions WxHxD: 470 x 150 x 400 mm

• Weight 17.5 kg

• Controls: OC plate/patient circuit control, Control of emitted power, Self-diagnosis

• Safety: EN60601-1, EN60601-1-2, EN60601-2-2

• Electrical Class: I CF, MDD 93/42/EC Class: II b

Standard equipment

1 – 5 m power cable

1 – Autoclavable handpiece with two buttons (30536)

5 – Sterile handpiece cold with two buttons (30551)

1 – Plate cable (30559)

5 – Rem disposable plates (30493)

2 – HP double watertight pedal set

3 – Short blade electrode 7 cm

3 – Blade electrode 16 cm long

3 – Short ball electrode Ø 4 mm, 6 cm

1 – Electrode cleaning sponge

1 – User manual (IT, GB)